• Back Plate with Spray Nozzle
• Powder Coated Pans Resist Rust
• Adjustable Sponge Bench to Minimize Splash
• Removable Side Panels for Easy Wheel Change
• Heavy Duty Ball Bearings, Neoprene Sealed and Greased for Life
• Available in 220V, 50Hz

The 10" Cork and Felt Glass Polisher is designed for coldworking glass to a high polish. The cork wheel combined with mildly abrasive pumice will pre-polish the work piece. The felt wheel combined with cerium oxide will bring the piece up to a high polish. The arbor can be quickly disassembled (4 bolts) for pulley change or bearing inspection. A water valve and spray nozzle are built in for easy hookup. The water valve takes 1/4" OD plastic tubing for gravity water flow or for pressure systems. Unit comes with one (1) 10" x 2" cork wheel and one (1) 10" x 2" felt wheel installed, dressed, and factory tested for balance. The felt wheel is installed with a metal side support. Wheels turn at 420rpm to minimize polish powder loss, while a rim speed of 1,230SFM creates the friction necessary for a brilliant finish. The wheels spin up and away from the user for maximum wheel access. This model ships fully assembled with belt guard, 1/2hp, high-torque motor, instructions, and product guarantee.